The P120.50 is a robust, high speed, (50 micron) inspection system with a large 1350x900mm measuring area.  Unlike other inspection systems which need to be located in a metrology room, the P120 is designed to be situated right next to your production machine. 
Other features include, automatic thickness measurement, inspection of simple 3D or folded parts, ability to measure parts larger than the table in sections, single click inspection and reverse engineering of sample parts/templates/paper-drawings/printed-material/images.

Typical applications include the inspection or reverse engineering of any punched/laser-cut/water-cut/stamped 2D parts, or the inspection of simple or folded 3D parts.

The P120.50 is an excellent choice for both job shops and OEM manufacturers.
OEM manufacturers tell us that the Planar system has saved them money because....

• Their previous methods of first article inspection were inaccurate, unreliable and very slow, resulting in poor quality control and long production machine down-times.  Now they can check each part in around 30 seconds, simply by double clicking the DXF file
• Their previous inspection methods would often fail to identify common problems such as missing holes, or incorrectly loaded/broken tooling.  The Planar system always spots these problems.
• Their previous inspection methods were not accurate enough, or did not take enough measurements to track their tool wear.  The Planar system takes up to 30,000,000 measurements in 0.1 seconds.  It measures every burr, every micro-joint, every nibbling mark.
• Their previous inspection methods were so slow they could only afford to inspect their parts after folding.  If the parts 2D shape was wrong, its thickness was wrong, the material was too hard, the sheet was not flat, etc. these problems would remain undetected until the part was bent, wasting time, metal and money.  The Planar system can confirm the 2D and 3D shape in less than 5 minutes total inspection time.
• The ability to catch errors in 2D and 3D as soon as they are produced reduces scrap and helps to maintain production schedules.

• They can take on reverse engineering projects which their competitors have to turn away, and with no competition on price they can charge what the customer is willing to pay!
• The Planar system is a state-of-the-art computer vision system.   This will give your customers the right impression about your business.
• Once exposed to our quick and easy reverse engineering and inspection, customers soon begin to expect this capability from their supplier, making it very difficult for your competitors to steal your business.